Pools

SeaKlear Natural Floculant

Welcome to Sea-Klear®... 

SeaKlear Natural Clarifier

The Amazing 4-in-1 Natural clarifier for Swimming Pools & Spas. The ONLY clarifier that guarantees to remove suntan oils & lotions and keep your pool or spa water crystal clear.

Sea-Klear® can also be used safely in:-

  • Swimming Pools
  • Spas
  • Fountains
  • Water parks
  • Fish ponds
  • Aquariums

Other brands base their clarifiers on petroleum. The Sea-Klear® patented process starts with clean cold northern European water crab shells which would otherwise be un-used. By starting with nature the result is a 'clean' product which is totally non-toxic. It is safe for the family, animals, fish and plants. It works better than anything else around.

Sea-Klear® is the only clarifier that works with the natural power of chitosan. Its special environmentally-friendly chemistry removes more organic material than any other clarifier and extends the life of your filter. You'll also minimize consumption of more costly chemicals. Clarifies brilliantly. Removes oil, soap, metals, cosmetics & other particulates.

Prevents stains, scum & foam. Lets you go longer between filter cleanings, backwashes and replacements. Sea-Klear® Natural Clarifier is compatible with all sanitizing systems, including ozone, ionization and biguanide, and either bromine or chlorine systems. The main ingredient in Sea-Klear® Natural Clarifier is chitosan, a safe nontoxic fiber similar to cellulose that grabs suspended particles and removes them from the water. Environmentally-safe, nontoxic, biodegradable. Best of all the dosage is 100ml to 50,000 litres so 1 litre will dose a big pool 10 times.

 

Clarifies Cloudy Water
Sea-Klear® Natural Clarifier got its name because it was originally used by the U.S. Navy to clear seawater for underwater photography. Environmentally safe, nontoxic and biodegradable, Sea-Klear® Natural Clarifier contains a natural ingredient, chitosan, which attracts the organic debris that causes cloudiness in pool, spa and hot tub water. A floc or mass of organic material is formed and carried to the filter, where it is more easily removed.

Removes Excess Oil
Unlike synthetic, petroleum-based clarifiers, Sea-Klear® Natural Clarifier actually removes oils from the water. This unique, patented technology works with any pool, spa or hot tub system. Oils can be introduced when sunscreens, lotions and cosmetics are left behind in the water. Sea-Klear® Natural Clarifier works to encapsulate the oil molecules and holds them in suspension so the oil doesn't stick to pool and spa surfaces or filters. When filters are cleaned, the oil is removed in the effluent. The filter stays cleaner and lasts longer.

Removes Stain-Causing Metals
The unique molecular shape and electrical charge of Sea-Klear® Natural Clarifier allow it to entrap and aggregate heavy metal particles, including manganese, copper and iron, which have come out of solution. Sea-Klear® Natural Clarifier does not interfere with metal ions from ionizers and mineral-based purifiers. In fact, Sea-Klear® Natural Clarifier enhances these systems by removing the non-essential, stain-causing metals.

Improves Filtration
Because the Sea-Klear® Natural Clarifier polymer is a "loose net molecule," it actually forms a subsurface over filters that helps remove organic debris and hold it above the filter media. Filters stay cleaner and work more efficiently.

 

Buy SeaKlear Clarifier Now

Please select required volume

Directions for using Sea-Klear®

1. Clean or backwash your filter if applying initial dose

2. Pour the desired amount (100ml treats 50,000 litres of pool water or 2,500 litres of Spa water) into a watering can. Dilute with approximately 5 litres of pool water and mix well. Then walk around the pool pouring the contents into the pool. If your pool water is especially dirty you can double or triple the dose.

3. Allow at least 12 hours of continuous filtration in pools and 30 minutes in Spas. (You can use the pool while it works.)

4. Maintain your water's sparkling clarity by using Sea-Klear® every week.

An average 8m x 4m pool will contain approximately 45,000 to 50,000 litres of water. A pool that has been allowed to turn green may need more than one treatment and may require a check of the sand filter especially if the sand is 4 or more years old.

The active ingredient in Sea-Klear® is a NATURAL polymer from crab shells. Sea-Klear® will not harm plants, animals or fish. It is safe for your family and our environment. Sea-Klear® forms a 'cocoon' on your filter to capture the very smallest of particulates (Sun tan oils, lotions and grease) It will NOT clog your filter It washes away each time you backwash your pool. 1 litre of Sea-Klear® will clean an average 8m x 4m pool 8 to 10 times. It also protects your sand filter and cuts down the number of times you need to backwash your pool.

 

 

 

Frequently Asked Questions Customer Testimonials

How long does Sea-Klear® Natural Clarifier last in the water?
Sea-Klear® Natural Clarifier is biodegradable and lasts five to seven days in the water.

Does Sea-Klear® replace Chlorine?
No it does not, but it will enable the chlorine to be much more effective. Using Sea-Klear® on a weekly basis should cut down your chlorine use.

Is Sea-Klear® an algaecide?
No but weekly use will inhibit the growth of algae. Sea-Klear® will easily mop-up dead algae spores after using an algaecide or high dose of chlorine.

How does Sea-Klear® Natural Clarifier compare with enzymes?
Sea-Klear® Natural Clarifier removes oil from the water by flocculation, changing the structure of the oil to a nonsticky, micron-sized bead that is taken into the filter. These beads hang loosely around the filter media without sticking or absorbing. When the filter media is cleaned, the oil beads are pulled out in the effluent. Conversely, enzyme products work by digesting oils. In many cases, by-product waste from enzyme products can still be left behind in water. Enzyme products are more expensive to use and can cause foaming.

Is a scale preventative needed when using Sea-Klear® Natural Clarifier?
In most cases Sea-Klear® Natural Clarifier works well at preventing scale. In hard water areas an additional scale reducer is recommended.

What if Sea-Klear® Natural Clarifier doesn't clear the water?
Check your filter! The technology of Sea-Klear® Natural Clarifier is contingent upon good filtration. Make sure filters are clean. For sand filters make sure the media is not dirty, old or worn.

What is the shelf life of Sea-Klear® Natural Clarifier?
The shelf life of Sea-Klear® Natural Clarifier is five years. Store out of direct sunlight.

How does Sea-Klear® Natural Clarifier improve filtration compared to other clarifiers?
Other clarifiers are synthetic and petroleum based. While they work well to clear the water, there is a side effect of combining oil with dirt. Scum formation on the filter surfaces causes the media to plug faster and elements to wear out faster. Sea-Klear® Natural Clarifier creates a "loose net molecule" over the media of the filter that picks up dirt and still allows water to flow through the devices.

REACH information
This product is REACH compliant.

 

7 days ago, I purchased 2.5 litres of Sea-Klear® for use in clients pools.
The reaction from clients has been beyond expectations!
JB (Lorca area) 9th Sept 2010.

It is a very nice product !
It has a very high absorbing power !
It is really a pity that such product is not available in Italy!
Prof. Marco Mascini Dipartimento di Chimica Università di Firenze
(August 2010)
.

I am a pool cleaner and I will be pushing your product to all of my customers and friends as well as the neighbours. The results we got with our own pool were amazing. I would be glad to give an endorsement on Sea-Klear to anyone. If they have any doubts about it, get them to call me
Bill Archer (July 2010).

CHITIN: (Pronounced KYTIN) Not an algaecide (meaning to kill algae) per se, but its properties might be called algae static (that is, to prevent algae growth). Chitin has the ability to coagulate and remove a wide variety of suspended materials and impurities from the water. This allows the sanitizer to more effectively kill contaminants unobstructed. It also improves the effectiveness of the filtration equipment. Sold under the trade name Sea-Klear, chitin can be a valuable weapon in your algae arsenal
www.swimbook.co.uk/algae_problems.htm.

We have used Sea-Klear with excellent results and can endorse your product.
Dave (Watermaid-Europe S.L.).

I announced on the radio today that we had a very cloudy pool. Put Sea Klear in, left the pump on all night... and hey presto... woke up this morning to a clear pool. Thank you, thank you, thank you. My announcement mentioned that I can personally recommend Sea Klear. All our listeners need to go out and buy some NOW!!!
Julie (Costa Calida Radio).

Sea-Klear® was used to maintain good water quality at the Oregon State Aquarium where KEIKO, star of the FREE WILLY movies was nursed back to health for his relocation to Iceland. Sea-Klear® is therefore safe to use in both freshwater and marine aquariums.
This product is used by Sea World Orlando, Sea World California, Minnesota Zoo and 20th Century Fox Underwater Productions.

We just had visitors from UK. 2 days and the pool went cloudy due to suntan lotion and then coloured t-shirts. 2 treatments with Sea-Klear® over 2 days and the water was back to crystal clear and sparkling. Sue

I maintain pools for a living and can highly recommend Sea-Klear®. I have recently had several pools go cloudy due to misuse and other factors and Sea-Klear® has rectified them every time. Daren

I have recently purchased this product and we have used it over the past 3 weeks and our pool water has never looked so good despite having 8 kids including football shirts and sun cream in at once, and the pool has been used every day for the past month. The water is crystal clear and looks polished.
Fantastic product. Barbara D35

Absolutely brilliant !! Used it in my fish pond and it worked great. Alan

 

Buy SeaKlear Clarifier Now

Please select required volume

AddThis Social Bookmark Button

Pool Treatment Portugal

Sistema de iluminação de piscinas LED de baixo consumo

LED Low Energy Pool Lighting System

Why invest in a beautiful swimming pool and then not use all of the features because they are too expensive to install and run?

Have you ever wanted spectacular pool lighting like in those fancy Caribbean hotels?

Don’t like leaving your pool lights on because of the huge cost?

Introducing Raiz Verde STARBURST LED Low energy programmable lighting system.

 

Efficient, economical & Ecological

Market leading technology...

CHANGE TO Raiz Verde STARBURST LED Energy Saving bulbs and save enough money to leave your lights on every evening and pay for the running of a pool heater.

Up to 33 x more economical to Run than a standard 500W Pool Bulb

SAVE MONEY AND THE ENVIRONMENT

ALSO

Our Starburst bulbs last up to 10 times longer than a standard pool light.

Nobody else comes close on price

Simply swap your existing bulb - Its simple

Our bulbs are PAR56 and can be retrofitted to the vast majority of below ground pools in Portugal.

Raiz Verde Starburst Multicolour - Red, Blue, Green combi LED creates 13 multi colour selectable fixed colour or colour changing options, all controllable by remote control effective up to a distance of 10 metres.

Raiz Verde Starburst straight eco replacement for your stndard 300 / 500 Watt high consumption low life bulb. Up to 33 times more economical.

 

Compare the costs of traditional high consumption bulbs:

Cost of lighting a pool using standard 500W bulbs:

Standard 300 / 500W pool light approx. 40€ x 5 (during the lifetime of the pool - 20 years): 200,00€

Annual running costs for standard lights in pool with two lights: 5 hours per night 525,00€ x 20 years: 10.500,00€

Cost of replacement low energy light bulbs:

2 x bulbs at 715,00€: 1.430,00€

Remote control and receiver: 800,00€

Total cost: 2.230,00€

 

Now compare the Raiz Verde cost:


2 x  Starburst Multicolour bulbs @ €275.00 x 2 €550.00
Integrated Receiver and remote controller: No Charge!

TOTAL COST: 550,00€

Pay for the cost of heating your pool by offsetting the costs by reducing the cost of the lighting by replacing your existing pool lights with our Starburst LED bulbs

 

Starburst LED bulbs Technical Specification:

  • Replacement PAR56 bulbs
  • 260 LEDs equivalent light output to 500W halogen bulb (16000mcd/LED)
  • 80 000 hour life
  • Lifetime guarantee

 

AddThis Social Bookmark Button

Pool Treatment Portugal

  • SolGuardIncrease pool temperature by up to 8°C
  • Eliminate water evaporation by 98% +
  • Reduce chemical consumption by up to 30%
  • Reduce energy consumption by over 50%
  • Reduce debris contamination
  • Save money
  • 5 year warranty



What is a Sol+Guard cover?

A Sol+Guard cover is an innovative swimming pool bubble cover.
The cover has a unique two ply combination, a clear top surface and a translucent tinted underside maximising solar gain.

The Sol+Guard cover provides a variety of benefits to the swimming pool owner. This ranges from reducing the heating and maintenance costs and the personal desire to save natural resources, to the practicalities of reducing energy and water usage.

The tough durable 500 micron pool cover materials are formulated for climate conditions in various continents of the world depending on UV (ultra violet) weathering intensity.

The materials we use combine weather and chemical resistant pigments with high performance light, weather and chemical stabilisation.

The materials used are non-toxic and registered in Australia, Canada, China, EU, Japan, Korea, Philippines and USA.

 

Increase pool temperature by up to 8°C through solar energy gain

The unique two ply combination of a Sol+Guard cover allows maximum solar gain to pass through the cover, increasing the pool temperature by up to 8ºC.

Eliminate Water Evaporation by 98% +

With a Sol+Guard pool cover you will be able to reduce water evaporation by over 98%, thus greatly improving your water consumption and your water charges, together with saving a vital natural resource.

Reduce Chemical Consumption by up to 30%

A Sol+Guard cover can help reduce chemical losses by evaporation by up to 30% when it is in use. All pool chemical levels and treatment should be maintained at the manufacturers recommended level.

Reduce Energy Consumption by over 50%

A Sol+Guard cover will eliminate evaporation and greatly reduce radiation. Heat retention tests carried out in collaboration with the Brighton and London Metropolitan Universities, showed conclusive energy savings of over 50%. This applied to oil, gas, electric heater or heat pump usage.

Reduce Debris Contamination

Debris such a leaves, dirt, insects and bird droppings are not only unsightly in a pool but also provide nutrients for algae and bacteria to feed on. When the pool is covered these contaminants will be kept out of the water, greatly improving the quality and appearance of the water.

Save Money

A Sol+Guard cover will save money by reducing water, energy, cleaning and chemical costs. The Sol+Guard pool cover will pay for itself in less than a year.

Warranty

The Sol+Guard cover has a 5 year warranty.

Environmental Benefits

By reducing the amount of energy needed to heat and filter your pool water, a Sol+Guard cover will greatly reduce your CO2 footprint. It also conserves water and, at the end of its life, a Sol+Guard cover is 100% recyclable.

Costs

A standard, ‘rectangle’ cover costs 10€ /m2, each cover is made specifically for your pool so costs will vary slightly according to your pool design.

 

Pool cover rollers

We can also provide a range of pool cover rollers ideal for your unique requirements. The range features fixed, mobile, wall mounted and wall plate models. The standard height to the rolling tube centre is 15". The stands are constructed from stainless steel and have strong UV stabilized brackets and fittings. The rolling tube has a slide adjustment mechanism to adjust for the width of the pool. The rolling tube has slots so that the cover to roller attachment kit, which is supplied, can easily be moved sideways to the correct position to suit the cover. 

 

SolGuard cobertura para piscinas SolGuard cobertura para piscinas

SolGuard cobertura para piscinas

SolGuard cobertura para piscinas SolGuard cobertura para piscinas

 

AddThis Social Bookmark Button

Pool Treatment Portugal

AquaSmarter provides perfect water for swimming pools. The natural alternative to using chlorine!

What is it?

A chlorine free poolAquaSmarter consists of a complex mix of water purification minerals coiled and encased in an injection molded, ventilated, plastic housing. This process optimises the ionization process and provides essential water flow to the coil.

When the water purification capsule is immersed in water it slowly begins to release minute quantities of invisible, negatively charged particles into the water.


Once released into water, these ions, with their active surfaces, act as powerful and natural disinfecting agents.

After a period of approximately 1 to 2 weeks the negatively charged ions completely infuse into the pool water and reduce the need for chlorine and other chemicals.

The AquaSmarter capsule measures just 9cm and has been specifically designed to fit into any pool skimmer basket or leaf trap baskets located around the pool or Jacuzzi.

How does it work?

The simple explanation…
The AquaSmarter water purification system uses small quantities of interactive ion-producing elements in a carefully balanced blend that work in water to create an electromagnetic process called galvanic action.

This ionization process creates negatively charged particles, which magnetically attract the pollutants continually entering the pool water. The ionized particles in the pool keep the water clean and clear 24 hours a day, all year long.

Once released into water, these ions, with their active surfaces, act as powerful and natural disinfecting agents.

The scientific explanation…
Invented by Dr. Stephen Verdon, the AquaSmarter Submersible Ionization Technology’ is based on the use of 5-Essential Minerals: Silver, Copper, Palladium, Zinc and Carbon.

The AquaSmarter Ionizing Capsule lasts for 12 full months and does not require electricity, constant maintenance or special plumbing. The AquaSmarter ionizing capsule is simply placed into the skimmer basket so that water passes through the specially designed (patented) ionizing capsule. The capsule automatically regulates the copper (Cu++) and silver ions (Ag+) produced from the when submerged. This process is also known as electro galvanic action.

Several studies conducted at NASA and several major US Universities have proved the high effectiveness of copper and silver ions in the purification of water. Once released into water, these ions, with their active surfaces, act as powerful and natural disinfecting agents.

AquasmarterWithin just fractions of a second, the positively charged copper and silver ions form electrostatic bonds with the negatively charged areas of the micro-organisms’ cell membranes. This process alters the permeability of their cell walls so that the nutrient intake (photosynthesis) of the micro-organism is impaired. Once copper and silver penetrate a cell, they attack the sulphur based amino acids in the cell proteins which are required by the cell for photosynthesis. As a result, photosynthesis becomes impossible and the cell becomes inactive.

Silver… It has been known for centuries that silver destroys bacteria and viruses, even those resistant to chlorine. Silver sulphate is frequently used in the antibacterial treatment of burns and open wounds and is even used to protect newborns.

Copper… As a trace element, copper plays a vital role in human metabolism. Copper is essential to the activity of many proteins and enzymes. It promotes the formation of skin pigments and has important functions in bone metabolism and the central nervous system. The maximum permissible value of copper specified by the German drinking water regulations is 2 mg/l. Thanks to the AquaSmarter technology, we provide perfect water with copper levels of 0,2 mg/l. Most of the classical electrode based ionization equipment needs copper levels of 0,5 - 0,7 mg/l to achieve acceptable results. The electrodes of type of systems are not precise, very sensitive to calcium deposits and require a lot of maintenance. AquaSmarter avoids all of these issues.

The most important advantage of copper and silver ions is that they achieve a sustained protection by disinfecting water without the use of any toxins. A large portion of the ions produced by the AquaSmarter also saturate the sand contained in the filter and prevents formation of bacterial colonies. Even after the filter system has been switched off, this effect lasts for more than 2 weeks.

The AquaSmarter technology is straightforward to operate and requires no maintenance. It has been demonstrated that copper and silver ions eliminate cryptosporidium, ecoli, coliforms, pseudomonas and legionella as well as many other species of bacteria and germs, including those chlorine-resistant varieties. This water disinfection technique can be used in practically all situations where lasting disinfection of bacteria, viruses and algae is required. It is already operational in thousands of swimming pools and whirlpools throughout the world.

Our Ionizing capsules are the only submergible capsule that contain a permeable, elastic, breathable and shrinkable non-oxidizing core coating which completely facilitate the release of the 5-Minerals (Silver, Copper, Zinc, Carbon and Palladium) contained in our patented capsule.

What are the benefits?

Straightforward to operate and requires no maintenance.

AquaSmarter PortugalReduces or eliminates the need for chlorine and other chemicals in Pools & Jacuzzi’s.…
Imagine... A fresh water stream flowing through your garden and cascading into your swimming pool...

Reduces chemical costs for your pool by up to 90% with the time release submersible ”ION” generating capsule. Lasts for 1 full year in constant operation...

Crystal clear, pure fresh water. The safest, easiest and cheapest alternative to chlorine and acid, reducing chlorine & acid usage by as much as 90%.


Reduces the need for chlorine and other chemicals for pools & Jacuzzi’s and is guaranteed to last for 1 full year... The system produces a soft, crystal clear and healthier pool.

The system is a freestanding submersible water purification ionic capsule therefore...

Electricity and extra pluming is NOT REQUIRED. The ionic battery consists of a complex mix of water purification minerals then coiled and encased in an injection molded ventilated plastic housing. This process optimized the ionization process and allows proper water flow to the coil.

Negatively charged particles magnetically attract pollutants that continually enter the water. The ionized particles in the pool keep the water clean and clear 24 hours a day, all year long.

Other commercially available water purification systems require electrical hard-wiring, additional control units and special plumbing into the pool’s re-circulation system. AquaSmarter requires NO electrical connections, NO external control units or special plumbing. Simply place the AquaSmarter capsule into the pool’s skimmer and follow the instructions. Nature does the rest!

Many people who were concerned about improving their health while helping to preserve the ecology of nature are already using the AquaSmarter system. With the AquaSmarter water purification system you can turn your pool or spa into a refreshing oasis.

Many hotels and people all over the world have found AquaSmarter to be a ’healthier, safer, easier and cheaper’ alternative to CHEMICALS or other hard wired water purification systems.

How do I use it?

The AquaSmarter system is placed into the filtration system of your pool. Within 24 hours, these metals begin to dissolve and produce negatively charged ions. This ionization process reduces the need for chlorine and other chemicals. These negative ions also attract dust and dirt particles (like a magnet) and drop them to the bottom of your pool.

Each capsule is guaranteed to last for twelve full months. Replace your capsules every 12 months (assuming your pool is in use for a full 12 month period. For example, if your pool is only in use for 6 months then simply remove the capsules from the water when the pool is not in use and they will last for 2 years). When removed from water, the capsules become inactive.
You pool is just filtered and brushed down in the normal way, without the need for adding any further chemical treatment.
The system leaves your pool or tank virtually chemical free and virtually eliminates the need for chlorine and other chemicals.

The AquaSmarter system produces crystal clean water, completely safe to drink.

 

Swimming pool instructions - AquaSmarter with chlorine:

Place AquaSmarter in the skimmer or pre-filter

Dosage is 1 AquaSmarter M150 capsule per 20m3 of water

  • For the first 2 weeks treat the pool with normal quantities of chlorine
  • In week 3, reduce the chlorine dosage by 50%
  • In week 4, reduce the chlorine dosage of week 3 by 50%
  • In week 5, reduce the chlorine dosage of week 4 by 50%

The dosage is week 5 in the dosage to be used with the AquaSmarter system. This results in an 87.5% reduction in chlorine usage!

It is important to maintain the pH level of the pool at between 7,0 and 7,6 - pool filters should be kept clean in the usual way and the pool filtered as normal. A higher than recommended pH will inhibit the ionization process.

 

Swimming pool instructions - AquaSmarter without chlorine:

It is possible to use the AquaSmarter technology without any chlorine in the pool, the number of capsules used is increased. The followin table provides quatities based on pool volume.

Volume of Pool With Chlorine
Without Chlorine
20m3 1 x M150 2 X M150
40m3 2 X M150 3 X M150
60m3 3 X M150 5 X M150
80m3 4 X M150 6 X M150
100m3 5 X M150 7 X M150
120m3 6 X M150 8 X M150
140m3 7 X M150 9 X M150

 

It is important that for the first 2 weeks the chlorine is applied as normal, after this initial 2 week period, chlorine dosage can be discontinued. pH levels must be kept between 7 and 7,6


Health issues associated with chlorinated water... New research [1] carried out in Spain has shown for the first time a link between exposure to chlorination by-products through inhalation and absorption through the skin, and increased risk of bladder cancer.

Drinking chlorinated water gave a 35% greater risk of bladder cancer, while use of swimming pools boosted bladder cancer risk by 57%. Those who took longer showers or baths and lived in municipalities with higher THM levels also had an increased cancer risk.
Absorption of THM through the skin or lungs was thought to have a more powerful carcinogenic effect because it did not undergo detoxification via the liver.
[1] American journal of epidemiology ; vol. 165, no. 2 : p. 148-156

So, the question now is, WHY would you bathe in chlorine when you can swim in ’PURE’ ionized water...?

 

A chlorine free swimming pool A chlorine free swimming pool A chlorine free swimming pool A chlorine free swimming pool

 

 

AddThis Social Bookmark Button

Pool Treatment Portugal