Raiz Verde - Renewable energy and eco friendly solutions that make sense

We offer two different types of award winning air source heat pump for domestic hot water heating. Reliable, safe and conforming to European standards these systems are manufactured in Portugal to exacting standards and exceptional quality combining high performance with superb value for money. An excellent alternative to solar thermal panels, with none of the seasonality issues affecting solar thermal.

Both are extremely efficient providing water heated to between 55C and 60C all year round, 24 hours per day, even on rainy days in the winter. The most economical solution on the market for providing hot tap water. With up to 80% of your hot water provided free, over 20 years product life expectancy and the value added to a property these systems ask the question, 'What are you waiting for?'

Performance: Both systems combine low prices with high quality and exceptional performance

Quality and Safety: Hot water storage cylinders are provided as standard and at no extra cost.

• Cylinders are constructed of tin plated copper sheeting (2mm thick) or of 316-L stainless steel sheeting
• Evaporator panel is 100% anodized aluminium
• Heat exchanger is constructed of tin plated copper
• Insulation is 100% natural and ecologically sound ground cork insulation
• 5 year guarantee on the copper cylinder, 3 on the stainless steel and 2 years on all the electrical components

Quality certified in accordance with European directives 73/23/EEC, 89/366/EEC, 92/31/EEC, 93/68/EEC


sunpack heat pumps

Providing up to 80% of your hot water free! A simple principle and an efficient way of using energy from the sun, the wind and the rain. The SunPack Heat Pump works on a thermodynamic principle and is based on the use of an evaporator panel. This panel captures the free energy which exists in direct and diffuse solar radiation, the rain and the wind. The energy is then transferred to a heat exchanger in the storage tank, heating the water inside at a cost approximately a fifth that of conventional systems.

• Made from anodized aluminium (black colour)
• High performance energy absorption, trapping as many free calories as possible
• Very resistant to bad weather conditions
• Attached to the exterior of the building (on the roof or a wall)
• No need for maintenance
• Uses R134a fluid (non-toxic, non-corrosive, non-flammable and ozonefriendly)
• Panel manufactured by a certified company, with thirty years experience in the field.

With a power consumption of only 390W, the system can provide water at between 55ºC and 60ºC all year round, 24 hours per day, even on rainy days in the winter. Given that most of the energy is harnessed from Nature, up to 80% of all the hot water obtained is free, which will significantly reduce your energy bill.

airpack heat pumps

Providing up to 70% of your hot water free!

A simple principle and an efficient way of using the energy present in the air.

The AirPack system works on a thermodynamic principle by which the external panel is replaced by an evaporator incorporated into the equipment.

The evaporator captures the calorific energy present in the air via a process which also produces its dehumidification and then transfers it to the heat exchanger in the tank. In this way, water can be heated at a cost approximately a quarter that of conventional systems.

Consumption

With a consumption of only 455W, the system can provide water at between 55ºC and 60ºC, all year round, 24 hours a day, even during the winter.

Given that most of the energy is harnessed from Nature, up to 70% of all the hot water obtained is free, which will significantly reduce your energy bill.

• Easy, practical and quick to install
• Dehumidifies the air in the area where it is placed
• No need for an evaporator panel, nor for piping to be installed for refrigeration fluid
• Can be installed in a wide range of places (e.g. laundries, garages, conservatories), in flats, houses, institutional homes, nurseries, sports complexes, etc.